Introduction: How to Calculate Steel Rod Weight Per Meter:
Rebar is a term used to refer to commonly known steel bars that form crucial constituent of most modern day construction project. Strength is essential in providing reinforcement and support to concrete structures ranging from simple residential homes to gigantic infrastructure projects. Accurate project planning, as well as structural stability, require a basic knowledge of normal steel bar weight per meter. We will consider the normal weight of mild steel bars from 6mm – 40mm diameter in this manual.
6mm Steel Bar: Approximately 0.22 kg per Meter
A
6mm steel bar typically weighs around 0.22 kilograms per meter (kg/m). This lightweight bar is often used for smaller construction and concrete projects where reinforcement is needed but without the added weight of larger bars.
8mm Steel Bar: Approximately 0.395 kg per Meter
Stepping up in size, an
8mm steel bar weighs approximately 0.395 kg per meter (kg/m). It provides increased strength and is suitable for various construction applications, including residential and light commercial projects.
10mm Steel Bar: Approximately 0.62 kg per Meter
The
10mm steel bar is a common choice, with an approximate weight of 0.62 kg per meter (kg/m). It offers versatility and strength, making it suitable for a wide range of construction and reinforcement needs.
12mm Steel Bar: Approximately 0.89 kg per Meter
A
12mm steel bar is heavier, weighing approximately 0.89 kg per meter (kg/m). Its increased thickness provides greater structural support, making it a preferred choice for larger construction projects and high-stress areas.
16mm Steel Bar: Approximately 1.58 kg per Meter
Stepping into larger sizes, a
16mm steel bar weighs approximately 1.58 kg per meter (kg/m). This size is often used in projects that require substantial reinforcement, such as bridges and heavy-duty foundations.
20mm Steel Bar: Approximately 2.47 kg per Meter
For even greater strength, a
20mm steel bar is a common choice, with an approximate weight of 2.47 kg per meter (kg/m). It is ideal for large-scale construction projects where structural integrity is paramount.
25mm Steel Bar: Approximately 3.86 kg per Meter
A
25mm steel bar offers significant strength and weighs approximately 3.86 kg per meter (kg/m). It is commonly used in complex construction projects, including commercial buildings and infrastructure.
32mm Steel Bar: Approximately 6.32 kg per Meter
A
32mm steel bar is substantial in size and weight, with an approximate weight of 6.32 kg per meter (kg/m). It is often employed in projects that require the highest level of reinforcement, such as bridges and heavy industrial structures.
40mm Steel Bar: Weight Varies
The weight of a
40mm steel bar can vary depending on the specific type and grade of steel used. It is typically a heavy and robust choice, suitable for the most demanding construction applications.
Understanding the typical weights of steel bars is essential for engineers, architects, builders, and project managers. This knowledge enables precise material planning, structural design, and adherence to safety standards. When embarking on construction projects, having a clear understanding of steel bar weights is a fundamental step towards building strong, reliable, and safe structures.
General Rod Weight per Bundle Information:
Steel rods or reinforcing bars supplied full length being U- bended or straight, of 40 feet which is about 12 meters. The civil engineer or contractor usually recommends either buying rod lengths, bundled portions, or large quantities that match each particular construction project specifications. These dimensions are dependent on the construction of the particular section or building part (like slab, beam, etc.), and the size of distribution.
6mm Steel Rod Weight per Bundle: Approximately 53.33 kg
A composite section is composed of 20*6mm steel rods individually weighing about 53.33kgs. This has a formula D2L/162, whereby D=6mm, L = 12m and 162 is a thumb rule number.
8mm Steel Rod Weight per Bundle: Approximately 47 kg
One set is a bundle of ten bars for the 8 mm steel rods weighing about 47 kg. The weight calculation is also done using the same equation (D^2L/162), considering the diameter (8mm), the length (12m).
10mm Steel Rod Weight per Bundle: Approximately 53 kg
<p>When it comes to 10 mm steel rods, a bundle means 10 separate bars adding up to about 53 kg in weight. Weight estimation according to D^2L/162 formula for a 10m of diameter.<p>
<p>Rod Weight per Bundle for Various Diameters: 0.5 inches, 0.8 inches, 0.9 inches, 1.0 inches, 1.6 inches, and 1.7 inches
Calculations for steel rods, measuring from 12mm – 40mm, are also comparable. Using the formula D^2L/162, the quantity of pieces in a bunch is variable depending on the diameter. </p><p>For example, each 12 mm steel rod bundle weighs around 53.33 kg.
U-bent or stright steel rods for the entire length which is about 12 meters – 40 feet. The requirement of each civil engineer or contractor depends on their project needs. Sizes will depend on the buildings’ structures as they need to be in proportions of the different diameters.
Steel Rod Weight per Piece
6mm Steel Rod Weight per Piece: Approximately 2.664 kg
On average, each piece of a 6 mm steel rod weighs about 2.664 kg. Using the formula D^2L/ 162 = (6×6×12) ÷ 162 = 2.664 kgs/.
8mm Steel Rod Weight per Piece: Approximately 4.74 kg
Each individual 8mm steel rod weighs approximately 4.74 kg. Using the formula = D^2L/ 162 = (8×8×12) ÷ 162 = 4.74 kgs/ piece= 4.74 kg per piece.
10mm Steel Rod Weight per Piece: Approximately 7.4 kg
For example, a whole ten millimeter thick steel rod would be about 7.4 kilograms. Using the formula D^2L/ 162 = (10×10×12) ÷ 162 = 7.404 kgs per piece in kgs.
12mm Steel Rod Weight per Piece: Approximately 10.667 kg
Ten point six kg would be an approximate weight of a 12 millimeter steel rod. Using the formula D^2L/162 = (12×12×12) ÷ 162 = 10.667 kgs/ piece.
16mm Steel Rod Weight per Piece: Approximately 18.96 kg
The weight of an average 16mm steel rod is around 18.96 kilograms per piece. Using the formula D^2L/ 162 = (16×16×12) ÷ 162 = 18.96 kgs/ piece.
20mm Steel Rod Weight per Piece: Approximately 29.63 kg
29.63 kg is the weight of a single standard 20mm steel rod. Using the formula D^2L/ 162 = (20×20×12) ÷ 162 = 29.63 kgs/ piece.
25mm Steel Rod Weight per Piece: Approximately 46.32 kg
A piece of a 25mm steel rod averagely weighs 46.32 kilograms. Using the formula D^2L/ 162 = (25×25×12) ÷ 162 = 46.32 kgs/ per piece.
These are the theoretical weights of steel rods per piece, providing essential information for construction and project planning. Additionally, it’s worth noting that a single 8mm diameter TMT rod weighs 4.6kg, a 10mm rod weighs 7.4kg, and a 12mm rod weighs 10.4kg. Each bundle consists of a specific number of rods, contributing to the total weight of the bundle.
Understanding the typical weights of steel bars is essential for engineers, architects, builders, and project managers. This knowledge enables precise material planning, structural design, and adherence to safety standards. When embarking on construction projects, having a clear understanding of steel bar weights is a fundamental step towards building strong, reliable, and safe structures.
Please feel free to check out our
tmt rod products
